The shell & tube graphite heat exchanger has a larger flow rate and a smaller flow resistance compared with the cylindrical block hole type graphite heat exchanger, which is suitable for larger graphite heat transfer surfaces application.
The shell & tube graphite heat exchanger is mainly used in heating, cooling, condensation, evaporation and absorption, which could bear the most organic and inorganic mediums, especially for phosphoric acid concentration.
We adopt the single tube sealing which could eliminate stress caused by thermal expansion, and each tube is independently extracted and replaced for future maintenance.
* High efficiency in heat transfer
* Small fluids resistance
* Fouling resistance
* Single tube is replaceable and easy for maintenance
* Lower cost advantage than block hole type heat exchanger
* Abrasion resistance treatment is available
Name | Process side | Service side |
Design pressure |
1.0MPa |
1.0MPa |
Design Temp. |
180℃ |
180℃ |
Medium |
Corrosive medium |
Water, steam and corrosive medium |
Heat exchange area |
1~1500m2 |
|
Bore diameter |
Φ50/Φ36 Φ37/Φ25 Φ32/Φ22 |